4.0mm Cannulated Cancellous Screws Instruments
Jindal Medi Surge Cannulated Cancellous Screws shaft accepts guide wires of 1.2mm, Hemispherical head of the screws ensures optimal annular contact with washers and plates when screws are angled, Low-profile head reduces possibility of soft tissue irritation, Standard 2.5mm hexagonal drive is compatible, Reverse cutting flutes assist in screw, Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression, Cancellous thread profile uses deep ‘cutting threads’ with a large pitch to increase resistance to pull out. The large pitch also accelerates screw insertion and removal. The partially threaded screws can be used to “lag” one bone fragment to another where the bone fragment is captured by the threads of the screw and pulled toward the fragment piece closest to the headed end of the screw. Self-tapping screw tip facilitates screw insertion by eliminating the need for tapping. The orthopedic cannulated cancellous bone screw instrument set is made from medical grade stainless steel & aluminium raw-material.
Threaded Guide Wire 1.25mm 150mm
Cannulated Counter Sink Q. C. Dia. 6.0mm
Cannulated Tap 4.0mm Q.C.
Double Drill Sleeve 2.7/1.25mm
Drill Guide With Stop 3.5mm/2.7mm With Two Inserts
Cannulated Hexagonal Screw Driver 2.5mm Tip
Direct Measuring Device S.S.
Stylet 1.25mm
Holding Clip
Cannulated Quick Coupling Tap Handle With Fibre Handle
Cannulated Drill Bit 2.7mm/1.35mm Length 160mm Q.C. End
Cannulated Drill Bit 3.5mm/1.35mm Length 160mm Q.C. End
Cannulated Drill Bit 2.7mm/1.35mm Length 130mm Plain Shank
Cannulated Drill Bit 3.5mm/1.35mm Length 130mm Plain Shank
Cannulated Tap 4.0mm With T Handle